Victron MultiPlus-II 48/3000: https://signaturesolar.com/victron-multiplus-ii-48-3000-48v-input-3000w-output-120v-35a-charger-transfer-switch/?ref=bkpkbxde

Victron Interface MK3-USB-C (VE.Bus to USB-C): https://amzn.to/3XWfloi This interface is used to connect to a Victron Energy VE.Bus enabled device so it can be programmed with a computer.

Victron Interface MK3-USB (VE.Bus to USB): https://signaturesolar.com/victron-interface-mk3-usb-ve-bus-to-usb/?ref=bkpkbxde

EG4-WallMount Indoor Battery: https://signaturesolar.com/eg4-wallmount-indoor-battery-48v-280ah-14-3kwh-indoor-heated-ul1973-ul9540a-10-year-warranty?ref=bkpkbxde

In this episode we program two Victron Energy MultiPlus II 48v 3000 VA system to operate in 240v Split Phase. This system is hooked up to a load center and is programmed using the Victron Interface MK3-USB-C (VE.Bus to USB-C) connected to a macbook pro. In the programming options there are options to operate the inverter chargers in parallel, 120 offset, and 180 offset. To get the 240v Split phase for use in the United state, we use the 180 degree offset. The Victron Energy Inverter chargers in this episode are connected to the EG4 Indoor Wall Mount battery.