LiTime 12 Volt 100Ah Mini Smart LifePO4 Battery Review with bluetooth BMS and LTCP
In this episode, we take a look at the Li Time 12 V 100 amp hour mini smart 12 V battery deep cycle with Bluetooth. This battery is equipped with the smart Bluetooth BMS that allows monitoring via the app and it has 20+ protections including low temperature, cut off protection auto recovery after overload protection spray resistance and moisture proof. It is the ideal battery for mobility due to its size and its weight. It is made with EV grade A Cells which provide over 4000 deep cycles at 100% depth of discharge. LiTime 12V 100Ah mini ALL-ROUND UPGRADED with Bluetooth 5.0 and 20+ Protections Smart Bluetooth for easy monitor battery status on LiTime App. 20+ protections with low-temp cut-off, auto-recovery after overload protection, salt-spray resistance, moisture proof. Industry highest level of energy density LiFePO4 battery: 162.03 Wh/L (147.79 Wh/kg). The lightest 12V 100Ah LiFePO4 battery ever with only 19.13 lbs in weight. LiTime BMS with 20+ Protections, safe and reliable for 10 years of everyday use. EV Grade A Cells provide 4000+ deep cycles at 100% DOD, 6000+ at 80% DOD, and 15,000+ cycles at 60% DOD. Expandable 4P4S (16 batteries) connection for max 20.48kWh energy. The all-new design allows you to install the battery in any direction, even upside down. 5-year warranty, backed up by technical support within 24h. Perfect for RV, Vans, and trolling motors where weight and size are your priority. Do NOT use as a starter battery. Note: Upon initial use or after manually powering off the battery, please ensure to connect the charger to turn on the battery. Recommended LiTime 14.6V 20A charger.
-------------------------------------------------------------------
Cell Type：LiFePO4 Warranty：5 Years Cycle Life：4000+ Nominal Voltage：12.8V Rated Capacity：100Ah Energy：1280Wh Max. Expansion (Parallel & Series)：4P4S Internal Resistance：≤40mΩ Certifications：FCC ID,UL-1973,CE,RoHS,UN38.3,MIC ABYC Official Certi.：√ Bluetooth：√ BMS：100A Max. Continuous Output Power：1280W Max. Continuous Charge Current：100A Max. Continuous Discharge Current：100A Max. Discharge Current 1 Second：500A Charge Method：CC/CV Charge Voltage：14.4±0.2V Recommend Charge Current：20A TEMPERATURE Charge Temperature：0℃ to 50 ℃ / 32℉ to 122 ℉ Discharge Temperature：20℃ to 60 ℃ / -4℉ to 140 ℉ Storage Temperature：-10℃ to 50 ℃ / 14℉ to 122 ℉ Low-Temperature Protection：√ Terminals：M8 Bolts Weight Approx.：19.13 lbs Size: 10.24*5.24*8.96 in Housing Material：ABS Protection Class：IP65
#LiTime #lifepo4 #battery
EG4 LifePower4 V2 Server Rack Battery Review | 48V 100AH UL1973 UL9540A
EG4 LifePower4 V2 Battery: https://signaturesolar.com/eg4-lifepower4-v2-lithium-battery-48v-100ah-server-rack-battery-ul1973-ul9540a-10-year-warranty/?ref=bkpkbxde
This episode we take a look at the brand new lifepower4 V2 battery from EG4. They have made significant upgrades on this battery from the version one and now it has better terminals, better BMS, more compatibility, Rapid shutdown capability, and also offers a 10 year warranty. All of these improvements I would not be surprised if they start no longer continuing with the LL battery because the V2 battery now bridges the gap between the lifepower4 for and the LL.
-------------------------------------------------------------------
The EG4 LiFePOWER4 48V V2 battery maintains the sturdy design and high performance of the original model, while adding new features for an improved user experience and better system integration. This Lithium Iron Phosphate (LiFePO4) battery is composed of 16 UL recognized prismatic 3.2V cells in series, offering over 6,000 deep discharge cycles at 80% Depth of Discharge (DoD). It has a nominal voltage of 51.2V, an energy capacity of 5.12kWh, and an internal 100A Battery Management System (BMS). The battery supports parallel connections of up to 64 units and includes a 10-year limited warranty. Improved terminal connections make it easier to attach chargers or EMP shields. The LiFePOWER4 48V V2 also features RS485 and CAN bus communication for broader inverter compatibility, along with a new Protocol 6 DIP switch for straightforward and convenient inverter and battery customization. Additionally, the E-Stop (Emergency Stop) rapid shutdown (RSD) functionality ensures fail-safe operation in high-risk environments, and dual on-board fire arrestors provide added peace of mind during operation. FEATURES AND BENEFITS Retains the robust architecture and high performance of its predecessor Composed of 16 UL recognized prismatic 3.2V cells in series Tested for over 6,000 deep discharge cycles at 80% Depth of Discharge (DoD) Nominal voltage: 51.2V Energy capacity: 5.12kWh Charge capacity: 100Ah New 10-year warranty Internal 100A Battery Management System (BMS) Equipped with BMS communication on/off switch New Protocol 6 DIP switch for convenient inverter and battery customization Supports closed-loop communication of up to 64 batteries in parallel, for a maximum storage capacity of 327.7kWh Enhanced terminal connections with two positive and two negative terminals CAN bus and RS485 ports for communication with a wider range of inverters E-Stop (Emergency Stop) rapid shutdown (RSD) functionality for fail-safe operation in high-risk environments Dual on-board fire arrestors for added safety during operation UL 1973 Recognized Component, UL 9540A (passed), UL 9540 Listed with 18kPV-12LV SKU 1511105
#offgrid #lifepo4 #battery #solar #solarenergy #eg4 #energystorage
EG4-WallMount Indoor Battery Review | 48V 280Ah | 14.3kWh | Indoor | Heated UL1973, UL9540A
In this episode, we take a look at the EG4 wall mount indoor power pro battery. This is the smaller brother or the indoor brother of the original power pro battery and it's pretty much the same battery except it is indoor rated only.
Indoor Battery: https://signaturesolar.com/eg4-wallmount-indoor-battery-280ah-51-2v-14-3kwh-indoor-heated-ul1973-ul9540a/?ref=bkpkbxde
EG4 Chargeverter (new model): https://signaturesolar.com/eg4-chargeverter-gc-48v-100a-battery-charger-5120w-output-240-120v-input-pre-order/
6000XP: https://signaturesolar.com/eg4-6000xp-off-grid-inverter-split-phase/?ref=bkpkbxde
-------------------------------------------------------------------
The WallMount Indoor 14.3kWh batteries are ideal for low-voltage residential indoor energy storage applications. The batteries use lithium iron phosphate cells with the highest safety performance and an intelligent Battery Management System (BMS) that can monitor and record the voltage of each cell along with the current, voltage, and temperature of the module in real-time. The BMS also contains a passive balance function and an advanced battery control method, both of which improve the performance of the battery pack. ON-BOARD LCD TOUCH SCREEN Easy to see BMS monitoring, and selectable closed-loop communications with EG4, Schneider, Sol-Ark, Victron, Growatt, Megarevo, Luxpower, and Deye inverters. DUAL ON-BOARD FIRE ARRESTORS Offer fail-safe protection against thermal runaway. INTEGRATED SELF-HEATING FEATURE Internal heating keeps cells operating during cold temperatures. INTEGRATED BUSBARS The battery design comes manufactured with 600A internal busbars with multiple terminals (4 positive & 4 negative) eliminating the need for external busbars when paralleling batteries and/or multiple inverters. INNOVATIVE EMERGENCY STOP FUNCTION The optional ESS disconnect can shut down all batteries and inverters (if equipped with rapid shut down capability) with the press of a button. THE PERFECT PARTNER TO EG4 INVERTERS The optional conduit box mates up directly to the connection ports of EG4 inverters allowing a sleek and efficient installation. For other inverters or stand-alone battery installation, the conduit box plugs should be installed. Module Operating Parameters Voltage: 51.2V Total Energy Capacity: 14.3kWh Capacity: 280Ah Charging Voltage (Bulk/Absorb): 56.0V (+/-0.8V) to 56.2V (+/-0.2V) Float Voltage: 54V (+/-0.2V) Low DC Cutoff: 44.8V (adjustable start from 47V to 45.6V) Charging Current: Up to 200A (continuous), recommended range: 60A - 160A Discharging Current: Up to 200A (continuous), recommended: 160A Environmental Parameters Charging Range: 32°F to ≈113°F (0°C to ≈45°C) Discharging Range: -4°F to ≈122°F (-20°C to ≈50°C) Storage Range: -4°F to ≈122°F (-20°C to ≈50°C) Ingress Protection: IP20 Charging/Discharging Protection Overcharging Protection: 205A (10 sec), 225A (3 sec) Temperature Protection: 23°F or 158°F (1 sec), -5°C or 70°C (1 sec) General Specifications Communication Ports: RS485/CAN Can be customized Cycle Life: 8000 Cycles, 80% Depth of Discharge (DOD) Design Life: Over 15 Years Weight: 282.2 lbs. (128 kg) Safety Certifications: UL1973, UL 9540A (Testing) Kit: BNDL-E0009-1 Battery: 1511092 Conduit box: 1511094. Above are affiliate links to an authorized retailer.
