DIY Portable Low Frequency Transformer based Power Station | $530 | 1.9 KWh | victron Phoenix
Links below to signature solar will give you $50 off any order of $500 or more.
Victron Phoenix: https://signaturesolar.com/victron-phoenix-inverter-12-1200-ve-direct-1200va-output-12vdc-input-120vac-output/?ref=bkpkbxde
Eco-worthy battery: https://amzn.to/4gMDULH
Charge controller: https://signaturesolar.com/victron-bluesolar-mppt-75-15-solar-charge-controller/?ref=bkpkbxde
Victron direct Smart Dongle: https://amzn.to/4iaFMyT
In this episode, we take a look at how to build a DIY portable power station using a 12V lithium iron phosphate battery and a Victron Phoenix 1200 VA low frequency transformer based inverter. This system can easily be put together in a matter of 10 minutes or less and cost less than $600. You can add all the Bluetooth capabilities and charge controllers for roughly the same cost. This system will be highly reliable mainly because it uses a low frequency transformer based system instead of almost all other power stations that are currently on the market, which are high frequency, based inverters. Due to the reliability, I have personally experienced with high frequency based inverters failing this is the optimal and more preferred system. Also because everyone knows the Victron Phoenix inverters and Victron equipment in general just seems to work all the time. The entire system can be monitored using free apps that can run on your phone that connect devices via Bluetooth. You can monitor the specs of the battery and the inverter giving you full monitoring capability directly. What I've noticed is many users. Don't actually need all of the capabilities and use power stations as points source use. Low frequency vs high frequency inverters
DIY Portable Mini Power Station in under 10 mins for under $600 | 1.2 KWh
In this episode, we show you how to build a 1.2 kilowatt hour DIY portable power station using parts roughly around $550. Most of these parts can be had for less if you substitute certain parts in and out and you can customize this station to meet your needs. For example, my initial designs originally included a charge controller, but then after realizing I will never really charge this in the wild using solar we decided to remove that charge controller. Version two included, connecting the battery and inverter using Anderson SB 50 connectors, but then I also realize I would really never swap out the batteries that often or ever to even need having that. You can also customize power station with lower wattage, inverters and lower capacity batteries to be more portable or light, which makes this a very, useful customizable power station. Tailor it to meet your needs. This design allows you to not be locked into anyone ecosystem also gives you the ability to monitor your power station using Bluetooth apps.
BougeRV Battery: https://www.bougerv.com/products/100ah-lifepo4-battery?aff=207
BougeRV Inverter: https://www.bougerv.com/products/2000w-12v-pure-sine-wave-inverter-with-bluetooth?aff=207
LiTime 45 ah battery: https://amzn.to/42Mz7GJ
LiTime 50 ah battery: https://amzn.to/42JHOSa
LiTime 100 ah Smart x mini battery (recommended due to size and has bluetooth): https://amzn.to/4hLWdSh
#eg4 12000XP #offgrid #inverter Level 2 full charging #tesla | Tesla wall charger 48A
Wallmount Battery: https://signaturesolar.com/eg4-wallmount-indoor-battery-48v-280ah-14-3kwh-indoor-heated-ul1973-ul9540a-10-year-warranty?ref=bkpkbxde
Lifepower4 V2 Battery: https://signaturesolar.com/eg4-lifepower4-v2-lithium-battery-48v-100ah-server-rack-battery-ul1973-ul9540a-10-year-warranty/?ref=bkpkbxde
EG4 Long Life Battery: https://signaturesolar.com/eg4-ll-s-lithium-battery-48v-100ah-server-rack-battery-ul1973-ul9540a-10-year-warranty?ref=bkpkbxde
In this episode, we take a quick look at the full charging of a Tesla model Y electric vehicle using the Tesla level 2 wall charger, which is powered by the off grid inverter EG4 12,000XP. This inverter is able to sustain a continuous output of 12,000 Watts which allows the connected Tesla wall charger to deliver charging at 48 A to the vehicle. For this type of set up, you need to make sure you have enough batteries. Make sure you have enough capacity and discharge capacity connected to this inverter. This inverter is a all in one off-grid inverter but because of it output, it is perfect for this situation.
Pioneer Low-Ambient Diamante Ultra #minisplit heating during a #winterstorm | #heatpump #hvac
Can a minisplit heatpump produce heat efficiency during a winter storm? What’s what we want to find out. In this episode, we take a look at the Pioneer diamante Low-Ambient 24,000 BTU 2-Ton 20 SEER Wi-Fi Ductless Mini Split Inverter and Air Conditioner with Heat Pump 208/230-Volt. This unit can heat with low ambient temperatures and is able to produce heat during the winter storm of 2024. The temperatures outside are well below freezing in the teens and it can produce up to 125° heat on the inside unit. This unit draws close to 2400 W during operation with the fan on high, and has quiet operation. It's worked fine during the snow storm and has been a reliable unit. This unit is powered using an offgrid system powered by the EG4 12000XP and EG4 wallmount & lifepower4 batteries. Due to being an inverter type unit, it can slowly ramps up power, and the power draw is what is needed by the unit at the time. No large startup surge.
The search for perfect air is finally over with Pioneer's newest Diamante Ultra series mini split heat pump air conditioner. Building upon the best-selling Diamante series, the Ultra improves on those highly-regarded features and brings only the latest innovations to the table. With its breakthrough interior unit design, the high-wall mount air handler is as silent as a whisper, while powerful enough to move tons of air. The Ultra introduces an enhanced aesthetic design, with a frosted matte finish that blends elegantly and seamlessly into any room. This Wi-Fi enabled system also allows full access to settings and programming of functions, all from the comfort of your smartphone, tablet, or virtual assistant. All capacities are super-high 20-23 SEER efficiency and Energy-Star certified, qualifying for all of the best rebates while cutting up your costly electricity bill. The entire installation process was re-imagined and optimized via thoughtful design enhancements, such as a removable bottom base plate to expose a helpful viewing window and provide easy mounting plate detachment. All of the features and functions that you know and love are still here, including a dual-directional indoor airflow louver, extreme ambient outdoor performance, and an all-in-one accessory kit and remote control that makes installation and operation easier than ever before. Don't settle for less, use only the best - let Pioneer's Diamante Ultra series provide you with the perfect air you deserve.
Ultra efficient cooling: 23,000 BTU/hour capacity with 20 SEER/12.5 SEER efficiency Ultra efficient heating: 24,000 BTU/hour capacity with 10 HSPF efficiency/3.2 COP Ultra silent operation: as quiet as 35 dB on the indoor section and 58 dB on the outdoor unit Ultra capable performance: heating during -13°F weather and cooling during 140°F weather Voltage of 208-Volt - 253-Volt, 60 Hz, 1 ph (30 Amp double-pole breaker recommended) Wi-Fi enabled to program schedules and control functionality via free Pioneer app Complete system set including indoor fan coil section, outdoor condenser section, wireless remote controller with remote holder, 16 ft. line set with other installation accessories and free vibration absorber feet for the condensing unit Certified by ETL, AHRI, DOE for safety, performance, and efficiency R410A pre-charged outdoor unit, accommodating line lengths up to 25 ft. long Diamante ultra series carries a full line of low-ambient wall-mounted mini splits with capacities ranging from 9,000 BTU/hour to 24,000 BTU/hour for various residential and light commercial applications ENERGY STAR
Portable under seat power station 5 kwh | Victron Phoenix 48v 1200VA | #victronenergy
Inverter: https://signaturesolar.com/phoenix-inverter-48-1200-120v-ve-direct-nema-gfci/?ref=bkpkbxde
Battery used in video has been discontinued, but other similar batteries can be found.
LiTIme 60 Ah: https://amzn.to/42c1UV3
LiTime 100 Ah: https://amzn.to/3CosgbL
In this episode, we take a look at the best mobile power station that fits completely under the backseat of your truck. This power station system can power some power tools, boil water, power lights, power equipment, used for tailgating, used for camping, and so much more. This power station set up can power up to 1200 VA. It has a fully charged capacity of 5 kWh, which can be increased almost infinitely by using DC to DC charging from the car. This is rock solid shouldn't have any reliability problems and is all monitor using the app on your phone. Victron Phoenix Inverter 48/1200 | VE.Direct | 1200VA Output| 48VDC Input | 120VAC Output The Phoenix Inverter VE.Direct is a uniquely compact, low-frequency inverter with a built-in full bridge toroidal transformer allowing it to handle large surge capacity from inductive loads. The Phoenix is distinctly efficient, with around 10W standard idle consumption or as low as 1-2w in eco mode. Compared to larger inverters, idle consumption can often be upwards of 100W+. This feature alone sets this unit apart and makes it perfect for running continuous loads throughout a 24hr period with the most efficiency possible. Features Connection versatility with desktop computers and mobile devices Fully configurable: Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load-dependent cut-off level Output: 120V 60 Hz In-and-output voltage, load percentage, and alarm monitoring Full-bridge PLUS toroidal transformer topology Short-circuit proof Overheat protection ECO Mode included Programmable remote power switch #litime #victronenergy #victronenergy #offgridsolar
LiTime 12 Volt 100Ah Mini Smart LifePO4 Battery Review with bluetooth BMS and LTCP
In this episode, we take a look at the Li Time 12 V 100 amp hour mini smart 12 V battery deep cycle with Bluetooth. This battery is equipped with the smart Bluetooth BMS that allows monitoring via the app and it has 20+ protections including low temperature, cut off protection auto recovery after overload protection spray resistance and moisture proof. It is the ideal battery for mobility due to its size and its weight. It is made with EV grade A Cells which provide over 4000 deep cycles at 100% depth of discharge. LiTime 12V 100Ah mini ALL-ROUND UPGRADED with Bluetooth 5.0 and 20+ Protections Smart Bluetooth for easy monitor battery status on LiTime App. 20+ protections with low-temp cut-off, auto-recovery after overload protection, salt-spray resistance, moisture proof. Industry highest level of energy density LiFePO4 battery: 162.03 Wh/L (147.79 Wh/kg). The lightest 12V 100Ah LiFePO4 battery ever with only 19.13 lbs in weight. LiTime BMS with 20+ Protections, safe and reliable for 10 years of everyday use. EV Grade A Cells provide 4000+ deep cycles at 100% DOD, 6000+ at 80% DOD, and 15,000+ cycles at 60% DOD. Expandable 4P4S (16 batteries) connection for max 20.48kWh energy. The all-new design allows you to install the battery in any direction, even upside down. 5-year warranty, backed up by technical support within 24h. Perfect for RV, Vans, and trolling motors where weight and size are your priority. Do NOT use as a starter battery. Note: Upon initial use or after manually powering off the battery, please ensure to connect the charger to turn on the battery. Recommended LiTime 14.6V 20A charger.
-------------------------------------------------------------------
Cell Type：LiFePO4 Warranty：5 Years Cycle Life：4000+ Nominal Voltage：12.8V Rated Capacity：100Ah Energy：1280Wh Max. Expansion (Parallel & Series)：4P4S Internal Resistance：≤40mΩ Certifications：FCC ID,UL-1973,CE,RoHS,UN38.3,MIC ABYC Official Certi.：√ Bluetooth：√ BMS：100A Max. Continuous Output Power：1280W Max. Continuous Charge Current：100A Max. Continuous Discharge Current：100A Max. Discharge Current 1 Second：500A Charge Method：CC/CV Charge Voltage：14.4±0.2V Recommend Charge Current：20A TEMPERATURE Charge Temperature：0℃ to 50 ℃ / 32℉ to 122 ℉ Discharge Temperature：20℃ to 60 ℃ / -4℉ to 140 ℉ Storage Temperature：-10℃ to 50 ℃ / 14℉ to 122 ℉ Low-Temperature Protection：√ Terminals：M8 Bolts Weight Approx.：19.13 lbs Size: 10.24*5.24*8.96 in Housing Material：ABS Protection Class：IP65
Best Waterproof Starlink case setup | Complete mobile high speed internet | Apache 4800 Anker
Anker Solix C300 DC powerbank: https://amzn.to/403ys0Q
Apache 4800 Case: https://www.harborfreight.com/4800-weatherproof-protective-case-x-large-green-56863.html
In this episode, we take a look at the Best case and set up for a Starlink mini system. This system uses the Apache 4800 rugged waterproof case locally sold at harbor freight and the stink mini satellite dish. All of this is powered by the anchor Solix 300 DC Using USB-C. The set up can run for hours if not days depending on your usage. You can charge or replenish the battery hot without taking down the Internet. Which is what gives this set up a really super awesome configuration. all contained inside of the case you can easily transport your system.
How to revive a lithium battery from protect mode | EG4 48V 100AH WP Lithium Iron Phosphate | LifePO4
In this video, we take a look at how to revive and start charging an EG4 WP | 48V 100AH Waterproof Lithium Iron Phosphate battery. this battery is currently in some kind of safe mode or protect mode and will not take a charge. Voltage reading across the terminals shows no voltage. The Bluetooth connectivity for the BMS also will not connect. We tried to methods on how to get the battery going again and it seems to be successful. The battery is able to charge up the capacity and also discharges capacity. This is just one way to do it. The battery in this video is one of EG4's Legacy products. But I assume this method will work on most lithium iron phosphate batteries, which have gone into Protect mode. IP68 RATED EG4 Waterproof Lithium battery 51.2V (48V) 5.12kW with 100AH internal BMS. Composed of UL listed prismatic cells which have been tested at 7,000 deep discharge cycles to 80% DoD – fully charge and discharge this battery daily for over 15 years without issue. Reliable and rigorously tested, with a 99% operating efficiency. Drop-in ready design provides an element-proof, reliable and effective storage solution for off-grid living, marine applications, RVer’s, etc. You can expect a versatile solution for any conversion from 48V lead-acid setups to lithium. lifepo4 #lifepo4 #lithiumbattery
Reliable Victron 240v Split Phase Off Grid system with EG4 | #victron MultiPlus-II
in This episode we take a look at probably the best 240v Split-phase system using VIctron energy and EG4 components. This is a low frequency Transformer based two component system paired with an EG4 Indoor WallMount battery. This system has all the benefits of low frequency inverters, and is made simple with a single EG4 Wallmount Battery with bus bars and quick connects. Battery cables are included with the battery. The system is considered off grid and is not connected to the grid at all. System monitoring is provided through the victron cerbo gx and the user is able to interact with the system via the GX touch 50, through a mobile app, or the online web portal from anywhere in the world.
EG4-WallMount Indoor Battery | 48V 280Ah : https://signaturesolar.com/eg4-wallmount-indoor-battery-48v-280ah-14-3kwh-indoor-heated-ul1973-ul9540a-10-year-warranty?ref=bkpkbxde
Victron MultiPlus-II 48/3000: https://signaturesolar.com/victron-multiplus-ii-48-3000-48v-input-3000w-output-120v-35a-charger-transfer-switch/?ref=bkpkbxde
Victron Energy Cerbo GX: https://signaturesolar.com/victron-energy-cerbo-gx/?ref=bkpkbxde Victron Energy | GX Touch 50: https://signaturesolar.com/victron-energy-gx-touch-50/?ref=bkpkbxde
BougeRV 12v LiFePO4 Battery 100Ah | BV12100 #lifepo4 #bougeRV
Link to Battery: https://bit.ly/3NJBKAr
Discount Codes
TGBATGBF - 12% off on the LiFePO4 Battery Until December 5th 2024
TGBATGBF1 – Get 21% off on inverter purchases: https://bit.ly/4hKWplC
BF2024 – Get 18% off on any BougeRV product: https://bit.ly/48Sypcg
In this episode we take a look at the BougeRV 12V 100Ah Group 24 LiFePO4 Battery. This specific battery is new to market, and comes in size of Group 24. It provides all the standard and necessary protections such as over discharge, over charge, temperature, as well as IP65 Rating. The BougeRV 12V 100Ah LiFePO4 battery provides 4,000–15,000 recharge cycles and has a lifespan of more than 10 years under ideal conditions. Upgraded BMS: Provides overvoltage, low voltage, overcurrent, short circuit, low temperature, and high temperature protection for the battery. The BMS ensures the safety of normal battery use by monitoring battery status and extending battery life Progressive Choice: Only 24.25 lbs,lighter than 66 lbs of lead-acid batteries. Charge Cycle Count of LiFePo4 battery is 4000-15000, which is much higher than 200-500 of lead-acid battery. LiFePo4 battery also supports full charge and discharge(100% DOD) Safety Expandable Battery Bank Supporting up to 16 batteries in a series-parallel pack (4S4P), the maximum capacity of the battery can be up to 20480 Wh. Overload Self-Recovery The BougeRV LiFePO4 battery can self-recover after charge and discharge overloads without disconnecting the wiring from the battery. The recovery process takes only 32 seconds, ensuring safe electricity use.
Best case and setup for StarLink Mini mobile | Milwaukee Packout Starlink mini usb-c
DeWalt USB-C Power DCB094k: https://amzn.to/3Cy74zN
In this episode, we take a look at the best case for caring and storing your starlink mini for complete mobility. This Milwaukee large packout organizer is perfect for caring the starlink mini satellite modem and batteries, including the power cable for USB C power delivery. Everything you need is carried in the case and is able to run the modem & wifi for days. In this case, it fits: Starlink Mini dish Starlink Mini barrel cable Starlink Mini usbc to barrel cable DeWalt DCB094 battery usbc adapter DeWalt 15ah Flexvolt battery DeWalt 9ah Flexvolt battery You can fit more items since there is empty space, but this is what I've found works perfectly for the whole solution. If you wanted to charge your batteries you could fit in an extra usbc power delivery cable and a power brick. #starlink #milwaukeepackout #usbc #dewalt
Level 2 Charging Tesla off-grid with solar & EG4 6000xp & Indoor Wallmount batteries offgrid
Tesla Referral Link: https://ts.la/injun699376
EG4 6000XP: https://signaturesolar.com/eg4-6000xp-off-grid-inverter-split-phase/?ref=bkpkbxde
EG4 Indoor Wallmount Battery: https://signaturesolar.com/eg4-wallmount-indoor-battery-48v-280ah-14-3kwh-indoor-heated-ul1973-ul9540a-10-year-warranty?ref=bkpkbxde
-------------------------------------------------------------------
In this episode, we charge a Tesla off grid using EG4 indoor wall mount batteries and the EG4 6000XP. This off system is powering the Tesla third generation wall connector and is able to charge the Tesla at level two speeds up to 48 amps. A single 6000xp is only able to push up to 23 amps, but with a larger inverter or multiple inverters you should be able to push the full 48 amps through the wall connector.
-------------------------------------------------------------------
EG4 6000XP Off-Grid Inverter | 8000W PV Input | 6000W Output | 480V VOC Input | 48V 120/240V Split Phase | All-In-One Solar Inverter The EG4 6000XP is a cutting-edge 48V split-phase, off-grid inverter and charger, designed to revolutionize your energy needs. With an impressive 8kW of PV input capacity and an efficient 6kW continuous power output, it also serves as a battery 140A charger. What sets it apart is its scalability - you can parallel up to 16 units for an impressive 96kWs of output power while controlling multiple stations and units seamlessly using our advanced EG4 monitoring software.
-------------------------------------------------------------------
EG4-WallMount Indoor Battery | 48V 280Ah | 14.3kWh | Indoor | Heated UL1973, UL9540A | 10-Year Warranty The WallMount Indoor 14.3kWh batteries are ideal for low-voltage residential indoor energy storage applications. The batteries use lithium iron phosphate cells with the highest safety performance and an intelligent Battery Management System (BMS) that can monitor and record the voltage of each cell along with the current, voltage, and temperature of the module in real-time. The BMS also contains a passive balance function and an advanced battery control method, both of which improve the performance of the battery pack. ON-BOARD LCD TOUCH SCREEN Easy to see BMS monitoring, and selectable closed-loop communications with EG4, Schneider, Sol-Ark, Victron, Growatt, Megarevo, Luxpower, and Deye inverters. DUAL ON-BOARD FIRE ARRESTORS Offer fail-safe protection against thermal runaway. INTEGRATED SELF-HEATING FEATURE Internal heating keeps cells operating during cold temperatures. INTEGRATED BUSBARS The battery design comes manufactured with 600A internal busbars with multiple terminals (4 positive & 4 negative) eliminating the need for external busbars when paralleling batteries and/or multiple inverters. INNOVATIVE EMERGENCY STOP FUNCTION The optional ESS disconnect can shut down all batteries and inverters (if equipped with rapid shut down capability) with the press of a button. THE PERFECT PARTNER TO EG4 INVERTERS The optional conduit box mates up directly to the connection ports of EG4 inverters allowing a sleek and efficient installation. For other inverters or stand-alone battery installation, the conduit box plugs should be installed.
-------------------------------------------------------------------
Wall Connector is an efficient and convenient home charging solution that lets you plug your vehicle in overnight and start your day fully charged. Wall Connector Features Speed Wall Connector can provide up to 11.5 kW / 48 amp output. For Tesla vehicles, Wall Connector provides up to 44 miles of range per hour of charge. For other electric vehicles, refer to your vehicle manufacturer’s guidance to determine your charging speed. Vehicle Compatibility Wall Connector is compatible with most electric vehicles including Tesla vehicles and other electric vehicles. Make sure the Wall Connector you are purchasing has a plug that matches the charging inlet on your electric vehicle. Access Control Charging Access Control gives you full control over which vehicles are allowed to charge with your Wall Connector. You can restrict charging access directly through the commissioning wizard without having to resort to a physical locking device. This functionality is limited to Tesla vehicles. Indoor/Outdoor Compatible Wall Connector’s lightweight design allows for versatile, indoor or outdoor mounting.
#tesla #modely #evcharging #model3 #offgrid #eg4 #6000xp
From no internet to high speed internet in under 15 minutes from anywhere with starlink mini
In this episode we take a look at getting up and running with SpaceX Starlink Mini. This neat portable device from spacex provides a way to get online with broadband internet from almost anywhere in the world with a clear view of the sky. We unbox the Starlink mini, then are able to get high speed internet setup and configured in less than 15 minutes with a minimal amount of electricity / energy involved.
Programming Victron MultiPlus-II for 240v Split phase | 2 x 120 | 48v 3000VA
Victron MultiPlus-II 48/3000: https://signaturesolar.com/victron-multiplus-ii-48-3000-48v-input-3000w-output-120v-35a-charger-transfer-switch/?ref=bkpkbxde
Victron Interface MK3-USB-C (VE.Bus to USB-C): https://amzn.to/3XWfloi
This interface is used to connect to a Victron Energy VE.Bus enabled device so it can be programmed with a computer.
Victron Interface MK3-USB (VE.Bus to USB): https://signaturesolar.com/victron-interface-mk3-usb-ve-bus-to-usb/?ref=bkpkbxde
EG4-WallMount Indoor Battery: https://signaturesolar.com/eg4-wallmount-indoor-battery-48v-280ah-14-3kwh-indoor-heated-ul1973-ul9540a-10-year-warranty?ref=bkpkbxde
In this episode we program two Victron Energy MultiPlus II 48v 3000 VA system to operate in 240v Split Phase. This system is hooked up to a load center and is programmed using the Victron Interface MK3-USB-C (VE.Bus to USB-C) connected to a macbook pro. In the programming options there are options to operate the inverter chargers in parallel, 120 offset, and 180 offset. To get the 240v Split phase for use in the United state, we use the 180 degree offset. The Victron Energy Inverter chargers in this episode are connected to the EG4 Indoor Wall Mount battery.
BougeRV 2000W 12V Pure Sine Wave Inverter with Bluetooth | BV122000
BougeRV 3000W Inverter: https://www.bougerv.com/products/3000w-12v-pure-sine-wave-inverter-with-bluetooth?aff=207
BougeRV 2000W Inverter: https://www.bougerv.com/products/2000w-12v-pure-sine-wave-inverter-with-bluetooth?aff=207
BougeRV 1000w Inverter: https://www.bougerv.com/products/1000w-12v-pure-sine-wave-inverter-with-bluetooth?aff=207
Amazon: https://amzn.to/3Mqt69y
In this episode we take a look at the 2000 W pure sine wave inverter from BougeRV. This inverter has Bluetooth and runs on 1 V power source and has a continuous output of 2000W. This continuous output of 2000 W should be considered its maximum output as it shuts down when it exceeds the 2000W limit. This inverter is new, and is packed with a bunch of features, including USB charging, remote control panel, and Bluetooth. The Bluetooth works with the app and you can control the features and functions and also monitor the status of the inverter. This inverter comes with cables, controller and manual. So that you can get started.
BougeRV 2000W pure sine wave inverter delivers 100% load-driven power with enhanced stability and durability. It ensures efficient and reliable operation for various appliances. With built-in Tuya Bluetooth technology, enjoy real-time monitoring and control via an app. Designed to minimize frequent disconnections, this 12V 2000W pure sine wave inverter offers stable power for a range of devices Fully 2000W Output Fully 2000W output, all appliances under 2000W can be run. Equipped with 15A/20A outlets, making sure the BougeRV pure sine wave inverter can be run for a long time at 2000W. Real-Time Remote Monitor BougeRV pure sine wave inverter is with built-in Bluetooth communication function, users can monitor operating data of the battery and appliances in any time through the BougeRV APP. Bluetooth acceptance range is 18-20M ( barrier-free). Users can control the inverter via the 19.7 feet wired remote controller and can install it in RVs and houses for their needs. Excellent Pure Sine Wave Inverter The pure sine wave inverter provides pure power, with a low distortion rate (≤5%), ensuring proper operation of sensitive electronic equipment. Lower power consumption and high conversion efficiency. Pure sine wave inverters keep voltage and current at safe levels, which extends the life of appliances. Pure sine wave inverter always makes less noise than modified sine wave inverter. Lithium Battery Soft Startup Protection With lithium battery soft startup protection function, the pure sine wave inverter is compatible better with lithium battery, preventing frequent disconnection. ( NOTE: If the surge current of inverter is greater than the over-discharge current of some lithium batteries, which will trigger the BMS protection function of these lithium batteries. Therefore, inverter will not work.) Intelligent Temperature Control With 2 high-speed cooling fans, BougeRV pure sine wave inverter can control temperature intelligently. Fan Cooling Startup: Temperature ≥113℉/ Output ≥50% (1000W). Reliable Service BougeRV pure sine wave inverter comes with 18-month tech support that commences from the date of purchase. BV122000
#bougerv #bougervinverter #inverter
How to get 240v from EcoFlow Delta 2 or any power station and run AC
Victron Autotransofmer 100A: https://signaturesolar.com/victron-autotransformer-120-240v-100a/?ref=bkpkbxde
Victron Auto transformer 32a: https://signaturesolar.com/victron-autotransformer-120-240v-32a/?ref=bkpkbxde
In this episode, we take a look at how to get 240 V split phase from a single phase 120V power station. In this episode we used it Eco flow Delta 2 power station and get 240V. But this set up will work for almost any power station that is powerful enough to provide 240V split phase load to devices. We use the Victron energy auto transformer, which has the ability to step up 120V single phase to 240V split phase. They have a 32 amp model and 100 amp model. this device has many different capabilities, and step up is only one function.
Victron Autotransformer can be used for step-up, step-down, and split-phase output balancing purposes. When operating in inverter mode, the neutral output of the inverter/charger must be connected to the ground to guarantee the proper functioning of a GFCI. In the case of a split-phase supply, the neutral must be grounded. For this purpose, a grounding relay is built into the autotransformer’s enclosure. Specifications Weight: 13.5 kg / 29.7 lbs Dimensions: 425 x 214 x 110 mm Input Voltage: 120/240V Input Breaker Size: 100A / 2-Pole Transformer Type: Toroidal Protection Category: IP21 Warranty 5-year limited warranty Additional Information Key Features Step-up, Step-down, or Balance Your System: The device facilitates adjusting voltage levels to meet system requirements, whether increasing, decreasing, or balancing. Ground Relay Included: Equipped with a ground relay for added safety and protection. Temperature Protection: Incorporates measures to safeguard against overheating, ensuring optimal performance and longevity.
#victron #victronenergy #autotransformer #powerstation #ecoflow #240v
EG4 LifePower4 V2 Server Rack Battery Review | 48V 100AH UL1973 UL9540A
EG4 LifePower4 V2 Battery: https://signaturesolar.com/eg4-lifepower4-v2-lithium-battery-48v-100ah-server-rack-battery-ul1973-ul9540a-10-year-warranty/?ref=bkpkbxde
This episode we take a look at the brand new lifepower4 V2 battery from EG4. They have made significant upgrades on this battery from the version one and now it has better terminals, better BMS, more compatibility, Rapid shutdown capability, and also offers a 10 year warranty. All of these improvements I would not be surprised if they start no longer continuing with the LL battery because the V2 battery now bridges the gap between the lifepower4 for and the LL.
-------------------------------------------------------------------
The EG4 LiFePOWER4 48V V2 battery maintains the sturdy design and high performance of the original model, while adding new features for an improved user experience and better system integration. This Lithium Iron Phosphate (LiFePO4) battery is composed of 16 UL recognized prismatic 3.2V cells in series, offering over 6,000 deep discharge cycles at 80% Depth of Discharge (DoD). It has a nominal voltage of 51.2V, an energy capacity of 5.12kWh, and an internal 100A Battery Management System (BMS). The battery supports parallel connections of up to 64 units and includes a 10-year limited warranty. Improved terminal connections make it easier to attach chargers or EMP shields. The LiFePOWER4 48V V2 also features RS485 and CAN bus communication for broader inverter compatibility, along with a new Protocol 6 DIP switch for straightforward and convenient inverter and battery customization. Additionally, the E-Stop (Emergency Stop) rapid shutdown (RSD) functionality ensures fail-safe operation in high-risk environments, and dual on-board fire arrestors provide added peace of mind during operation. FEATURES AND BENEFITS Retains the robust architecture and high performance of its predecessor Composed of 16 UL recognized prismatic 3.2V cells in series Tested for over 6,000 deep discharge cycles at 80% Depth of Discharge (DoD) Nominal voltage: 51.2V Energy capacity: 5.12kWh Charge capacity: 100Ah New 10-year warranty Internal 100A Battery Management System (BMS) Equipped with BMS communication on/off switch New Protocol 6 DIP switch for convenient inverter and battery customization Supports closed-loop communication of up to 64 batteries in parallel, for a maximum storage capacity of 327.7kWh Enhanced terminal connections with two positive and two negative terminals CAN bus and RS485 ports for communication with a wider range of inverters E-Stop (Emergency Stop) rapid shutdown (RSD) functionality for fail-safe operation in high-risk environments Dual on-board fire arrestors for added safety during operation UL 1973 Recognized Component, UL 9540A (passed), UL 9540 Listed with 18kPV-12LV SKU 1511105
#offgrid #lifepo4 #battery #solar #solarenergy #eg4 #energystorage
EG4 LifePower4 v2 BMS communications with Victron
Lifepower4 v2 battery: https://signaturesolar.com/eg4-lifepower4-v2-lithium-battery-48v-100ah-server-rack-battery-ul1973-ul9540a-10-year-warranty/?ref=bkpkbxde
-------------------------------------------------------------------
EG4-LifePower4 V2 Lithium Battery | 48V 100AH | Server Rack Battery | UL1973, UL9540A | 10-Year Warranty
The EG4 LiFePOWER4 48V V2 battery maintains the sturdy design and high performance of the original model, while adding new features for an improved user experience and better system integration. This Lithium Iron Phosphate (LiFePO4) battery is composed of 16 UL recognized prismatic 3.2V cells in series, offering over 6,000 deep discharge cycles at 80% Depth of Discharge (DoD). It has a nominal voltage of 51.2V, an energy capacity of 5.12kWh, and an internal 100A Battery Management System (BMS). The battery supports parallel connections of up to 64 units and includes a 10-year limited warranty. Improved terminal connections make it easier to attach chargers or EMP shields. The LiFePOWER4 48V V2 also features RS485 and CAN bus communication for broader inverter compatibility, along with a new Protocol 6 DIP switch for straightforward and convenient inverter and battery customization. Additionally, the E-Stop (Emergency Stop) rapid shutdown (RSD) functionality ensures fail-safe operation in high-risk environments, and dual on-board fire arrestors provide added peace of mind during operation. FEATURES AND BENEFITS Retains the robust architecture and high performance of its predecessor Composed of 16 UL recognized prismatic 3.2V cells in series Tested for over 6,000 deep discharge cycles at 80% Depth of Discharge (DoD) Nominal voltage: 51.2V Energy capacity: 5.12kWh Charge capacity: 100Ah New 10-year warranty Internal 100A Battery Management System (BMS) Equipped with BMS communication on/off switch New Protocol 6 DIP switch for convenient inverter and battery customization Supports closed-loop communication of up to 64 batteries in parallel, for a maximum storage capacity of 327.7kWh Enhanced terminal connections with two positive and two negative terminals CAN bus and RS485 ports for communication with a wider range of inverters E-Stop (Emergency Stop) rapid shutdown (RSD) functionality for fail-safe operation in high-risk environments Dual on-board fire arrestors for added safety during operation UL 1973 Recognized Component, UL 9540A (passed), UL 9540 Listed with 18kPV-12LV
1511105 #offgrid #lifepo4 #battery #solar #solarenergy #eg4 #energystorage
How to power Victron Cerbo GX using POE
In this episode, we take a look at how to power the Victron energy cerbo GX using power over ethernet (POE). This method utilizes a POE connection to provide power to the cerbo GX and also ethernet connectivity to the cerbo. This method allows the power and connectivity to come from one cable. You can also use this method to only power the cerbo GX and still use Wi-Fi. There allows for a lot of versatility in terms of installations.
CERBO GX: https://signaturesolar.com/victron-energy-cerbo-gx/?ref=bkpkbxde
TP-LINK POE SPLITTER: https://amzn.to/3MxjqtZ
#offgrid #battery #solar #victron
Victron Phoenix 48v 1200va Inverter review and portable power station build | ve.direct
Victron Phoenix Inverter: https://signaturesolar.com/phoenix-inverter-48-1200-120v-ve-direct-nema-gfci/?ref=bkpkbxde
EG4 48v 100 ah Battery: https://signaturesolar.com/eg4-wp-waterproof-lithium-battery-48v-100ah-bluetooth-200a-output/?ref=bkpkbxde
LiTime 48v 100 ah battery: https://amzn.to/4fYgmod
LiTime 48v 60 ah battery: https://amzn.to/4g2cxyd
Anderson Connector pigtails: https://amzn.to/3AGLckN
Victron ve.direct smart dongle: https://amzn.to/4e07TPm
In this episode we take a look at the Victron Phoenix 48v 1200VA inverter. This is a solid low frequency transformer based inverter that runs on the 48V platform. They make other inverters of this type in different wattage and in different voltages. This one has VE directly you can connect to it using the Victron connect app using the Bluetooth smart dongle and control different settings.
The Phoenix Inverter VE.Direct is a uniquely compact, low-frequency inverter with a built-in full bridge toroidal transformer allowing it to handle large surge capacity from inductive loads. The Phoenix is distinctly efficient, with around 10W standard idle consumption or as low as 1-2w in eco mode. Compared to larger inverters, idle consumption can often be upwards of 100W+. This feature alone sets this unit apart and makes it perfect for running continuous loads throughout a 24hr period with the most efficiency possible. Features Connection versatility with desktop computers and mobile devices Fully configurable: Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load-dependent cut-off level Output: 120V 60 Hz In-and-output voltage, load percentage, and alarm monitoring Full-bridge PLUS toroidal transformer topology Short-circuit proof Overheat protection ECO Mode included Programmable remote power switch
Using the Victron Energy VE.Direct to Bluetooth Smart dongle you can display your Victron Energy BMV or MPPT information on iOS and Android devices, using the VictronConnect app With the Victron Energy VE.Direct to Bluetooth Smart dongle you can get live status info, see historical values as well as configure Victron Energy products The dongle works together with the VictronConnect App, available for both Android and iOS devices Easily view information wirelessly such as battery status and solar panel power, plus other useful data The dongle is able to read data from all products with a VE.Direct port, such as the Victron Energy BMV-70x series battery monitors, Phoenix Inverters with VE.Direct port, MPPT Solar Charge Controllers
How to setup Victron and EG4 Battery Communications with Multiplus and Cerbo GX
Victron Energy Cable: https://signaturesolar.com/victron-ve-can-to-can-bus-bms-type-a-cable-1-8m/?ref=bkpkbxde
Cat6 pass through connectors: https://amzn.to/3YTutF0
Cat6 pass through crimper: https://amzn.to/3YQQggB
This episode will take a look at how to set up BMS communications between your Victron energy system and EG4 batteries. This procedure will work on EG4 indoor wallmount battery, EG4 power pro battery, and EG4 long life/LL battery. We set up the battery communications using the CERBO GX but it will also work with the CERBO S and the ekrano. You have a few options here. One option is to purchase the Victron energy cable, the second option is to make your own cable from a pre-terminated standard cat five cable, last option is to custom make both ends using cat5 or cat 5 cable.
WIRING SPECS
Battery side
pin 4: brown stripe | pin 5: brown
Cerbo Side
pin 7: brown stripe | pin 8: brown
Victron MultiPlus-II 48/3000 off grid system made easy with Cerbo GX and EG4 battery.
EG4 Indoor Battery: https://signaturesolar.com/eg4-wallmount-indoor-battery-48v-280ah-14-3kwh-indoor-heated-ul1973-ul9540a-10-year-warranty-pre-order/?ref=bkpkbxde
In this episode, we take a look at the Victron multiplus II inverter which is rated at a capacity of 3000 VA. This is an off grid inverter that can do charging and have an automatic transfer switch. We also look at connecting it to the servo GX and the touch 50 screen all powered by the EG4 indoor wall mount battery. This system is a solid reliable system that I would recommend for anyone getting started with solar because of the reliability of these components
Victron MultiPlus-II 48/3000 Inverter has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing. It also features built-in anti-islanding and an increasingly long list of country approvals. Features Unique PowerAssist - Prevents overload of a limited AC source. First, battery charging automatically reduces. Second, shore side supply will be boosted with power taken from the battery. Energy Storage System Combine with MPPT Solar Chargers or Grid-tie PV Inverters. UPS Function Automatically takes over in the event of a grid failure in less than 20milliseconds. Remote Monitoring and Control Access can be from a phone, tablet, laptop, or PC for multiple operating systems.
Victron Energy Cerbo GX is Victron's newest communication center and allows you to get the most out of your system by managing it from wherever you may be. You can connect through the Victron Remote Management (VRM) Portal, access from the GX Touch, an MFD, or even connect from the VictronConnect App via Bluetooth. Features Perfect Monitoring & Control Control any setting to optimize the system, follow up on alerts, or perform diagnostics remotely. Maximize System Performance The Cerbo GX Maximises system performance in real-time! Simple Mounting & Configuration Optimized to meet installer standards.
Victron Energy | GX Touch 50 is the display accessories for Victron’s Cerbo GX. The five-inch and seven-inch touchscreen displays give Get an instant overview of your system and adjust settings in the blink of an eye with the touch screen displays. A waterproof design, single cable set-up, and simple installation create a tidy yet flexible framework that makes your system as pleasant to look at as it is to use.
EG4-WallMount Indoor Battery 48V 280Ah | 14.3kWh | Indoor | Heated UL1973, UL9540A | 10-Year Warranty
The WallMount Indoor 14.3kWh batteries are ideal for low-voltage residential indoor energy storage applications. The batteries use lithium iron phosphate cells with the highest safety performance and an intelligent Battery Management System (BMS) that can monitor and record the voltage of each cell along with the current, voltage, and temperature of the module in real-time. The BMS also contains a passive balance function and an advanced battery control method, both of which improve the performance of the battery pack. ON-BOARD LCD TOUCH SCREEN DUAL ON-BOARD FIRE ARRESTORS Offer fail-safe protection against thermal runaway. INTEGRATED SELF-HEATING FEATURE Internal heating keeps cells operating during cold temperatures. INTEGRATED BUSBARS The battery design comes manufactured with 600A internal busbars with multiple terminals (4 positive & 4 negative) eliminating the need for external busbars when paralleling batteries and/or multiple inverters. INNOVATIVE EMERGENCY STOP FUNCTION The optional ESS disconnect can shut down all batteries and inverters (if equipped with rapid shut down capability) with the press of a button. THE PERFECT PARTNER TO EG4 INVERTERS The optional conduit box mates up directly to the connection ports of EG4 inverters allowing a sleek and efficient installation. For other inverters or stand-alone battery installation, the conduit box plugs should be installed.
EG4 Chargeverter - GC review
Chargeverter-GC: https://signaturesolar.com/eg4-chargeverter-gc-48v-100a-battery-charger-5120w-output-240-120v-input/?ref=bkpkbxde
In this episode, we take a look at the new chargeverter from EG4. This is their second generation of the chargeverter and the GC stands for generator connected. This is a huge upgrade from the first chargeverter due to the primary new functions including but not limited to quick connect for cables, independent mounting bracket, generator connectivity, battery communications, larger screen, ability to set start and stop charge parameters and also comes in a new black.
EG4 Chargeverter 5KW AC Charger
Introducing the EG4 Chargeverter 5KW AC Charger, a high-performance battery charger designed for reliability and versatility. With its 48V 100A capacity and 5120W output, this charger ensures efficient power supply for various applications. Its compact design and dual 240/120V input make it suitable for diverse setups. Bad Weather Resilience: Charge batteries during low light conditions using a generator (up to 100A) Ideal for unpredictable weather patterns Protection from "Dirty Power": Guards against unreliable sine waves from lower-budget generators Protects inverters from power quality issues Charger Output Specifications: Optimized for 240 VAC power supply Nominal Battery Voltage: 48VDC Adjustable Charge Current: 0-100A at 240VAC Adjustable Charge Voltage: 43-57VDC (Default at 54VDC) Maximum Output Watts: 5120W at 240 VAC AC Input Specifications: Plug directly into a generator without concern for power issues AC Input Voltage Range: 90-264VAC Maximum Input Amps: 26A at 240VAC, 28A at 120VAC Dry Contacts: Control of generator start/stop function based on Voltage or state of charge (SOC) Using EG4 Batteries? Closed loop communication with EG4 batteries for charging based on battery state of charge (SOC), when batteries are not in communication with the inverter SKU 1511091
Tigo TS4-A-O review | Optimization, Monitoring & Rapid Shutdown
In this episode, we take a look at the TS4–A-O optimizer monitoring solution and rapids shut down solution from TIGO. These are solar modules that are supposed to be mounted to each panel then connected as designed panel array. They serve many functions, including rapid shut down monitoring and optimization. The optimization function works without any additional components out of the box, but the rabbit shut down, requires another module, and the monitoring solution also requires another module plus a subscription. Are these modules worth it? Let's find out.
TIGO
Tigo TAP is required for rapid shutdown and Tigo CCA is required for monitoring with TS4-A-O.
Optimization is a Flex MLPE function available as an integrated modular junction box base (TS4-O) or as an add-on unit (TS4-A-O).
Design using unequal string lengths, mixed orientations, or areas of mismatch. Install in shaded areas with a reduced setback ratio. In addition to optimization, the TS4-A-O enables module-level monitoring, and rapid shutdown in compliance with NEC 2014, 2017, and 2020. Optimization Monitoring Rapid Shutdown Features and Benefits Suitable for up to 700W solar modules The higher performance optimizer with Predictive IV Technology (PIV) The ONLY optimizer with selective deployment Includes the benefits of Safety & Monitoring Meets US NEC rapid shutdown requirements Optimizes right out of the box Shade and age tolerance to maximize lifetime yield Works wirelessly with the TAP & CCA 25-year warranty
Aptos DNA bifacial panel & Trina vertex S bifacial panel
Trina Vertex 385w: https://beenebrothers.com/product/trina-vertex-385w-new-panel
In this episode, we take a look at two bifacial solar panels from Aptos and Trina. These solar panels are in the range of 372 - 400 W. Both of these solar panels are bi-facial and per have a bifacial gain when mounted correctly due to the open backside. The Aptos panel can be had for about $104 per panel and the vertex solar panel can be had for roughly around $140. these panels have been in use for several projects but the ones we are checking out in this are brand new. These panels are a great balance between size performance and cost so these are my go to panels for projects where they can be used.
Aptos DNA-120-BF26-370W
Rated Power 370W Rated Power per Cell 3.08W Efficiency 20.28% Power Tolerance -0/+3W Temperature Coefficient PMax: -0.32 Voc: -0.26 Mono-crystalline Panel Dimensions: 1756 mm L 1039 mm W 35 mm D Cell Count 120
Trina Vertex TSM-DE09C.07
Electrical Specs: Power 385W VMP 33.6V IMP 11.38A VOC 40.4V ISC 12.00A Panel Dimensions 1754×1096×30 mm (69.06×43.15×1.18 inches) Mono-Crystalline Weight 46.3lb tempered glass & open back 3ft mc4 leads
EG4 BrightMount Extension Rail Kit
In this episode, we take a look at the Bright Mount extension rail kit from EG4. This kit is designed to extend the bright out rail system to allow for use of larger solar panels. If you have panels larger than 44 inches wide you need this extension kit to mount for panels to the bright mount rack system. It comes with two splicing rails, two jumpers and self tapping screws for installation. SKU:1511053-ERK Upgrade your system effortlessly! Now, you can extend the horizontal rails by an additional 5 inches, allowing for the seamless installation of solar panels up to 45 inches wide. One kit contains a pair of extension sets and one kit is required per BrightMount Rack
Installing the EG4 BrightMount Solar Panel Ground Mount Rack | 4 Panel Adjustable Angle ground mount
BrightMount Solar panel racking kit: https://signaturesolar.com/eg4-brightmount-solar-panel-ground-mount-rack-kit-4-panel-ground-mount-adjustable-angle-pre-order/?ref=bkpkbxde
We install the EG4 brightmount solar panel ground mount rack system from EG4. This system is designed to mount four panels to the solar ground mount rails, but if you are mounting panels about 44 to 45 inches wide then you will need to purchase a separate rail extension kit. We end up mounting for Heliene 490 W solar panels on this kit and the kit is mounted to raised post using cinderblocks.
-------------------------------------------
EG4 BrightMount Solar Panel Ground Mount Rack Kit | 4 Panel Ground Mount | Adjustable Angle New Feature: Adjustable Angle! (25-35 Degree Adjustment) Built to last using high-quality aluminum and stainless steel alloys, the EG4 solar panel ground mount will stand firm even in winds up to 105 mph. EG4’s attention to quality and customer has produced a cost-effective, low-profile solution meaning that you can set these up anywhere and count on them to last. We back our rack with a 10-year mechanical warranty so that you know your array is secure for years to come. However, our hardware isn’t just durable, it’s also simple! With just a few tools, you can assemble the entire rack alone, no assistance is needed. This makes it a perfect choice for homeowners and installers alike by cutting labor costs and streamlining the installation process. Cost-Effective Yet Outstanding Durability Aluminum/Steel Alloy Lightweight, strong, and weather resistant. Rated to Withstand Winds Up to 105mph. Low Profile Design Simple Design - Install Almost Anywhere! Quality Assurance Backed By a 10-Year Warranty BrightMount Versatility Multiple Terrains Concrete, wood, soil with appropriate substructure Flat Top Roof(tied to struts) Adjustable Angle: 25° - 35° for all around maximum solar absorption. Supports up to 4 solar panels (44 inches wide or less) Easy Installation Minimal tools needed Optional concrete if needed with a masonry drill bit Gloves, drill or wrench, tape measure & level Can be Assembled in ~30 minutes Recommended Tools/Safety Equipment Work gloves, cordless drill/driver, monkey wrench, 12.5mm drill bit, Allen wrench, measuring device, level. Rails: 4x | 1591011-SP24 | EG4 BrightMount Rail | 2280mm | 89.76 In Mounts: 4x EG4 25 Degree Mounts Gusset: 6x EG4 L-Connector for Rails Rail Connector: 2x EG4 Rail Connector With Bonding Jumper End-Clamps: 4x EG4 End Clamp 30mm 4x EG4 End Clamp 35mm 4x EG4 End Clamp 40mm Mid-Clamps: Fits 30mm to 40mm Lugs: 2x EG4 Earth Lug Extruded 6005 Grounding Clips & Wire Management: 6x EG4 Grounding Clip SS304 4x PV Cable Lip(Wire Management) - 2 Wire Expansion Screw: 16x EG4 Expansion Screw 10*100
In this episode, we check out the EG4 enclosed battery cabinet with wheels. This is a heavy duty battery cabinet with casters designed to hold six server rack batteries. It has bus bars included mounted on the side that is rated for up to 600 Amps. It also comes with four glands and all the mounting hardware you need to mount the caster and also the batter the battery rack comes preassembled has caster feet welded squares to the bottom and can be locked.
-------------------------------------------------------------------
EG4 Storage Solutions 6 Slot Battery Rack, featuring an enclosed cabinet design. The cabinet door swings open on a sturdy hinge, allowing easy access to the equipment and cables for easy installation. The door panel locks securely to help prevent damage, tampering, and/or theft. The front door is vented, allowing for air to flow freely and keep equipment cool. Top and bottom ports allow for easy cable routing. The Rack comes fully assembled and ready to roll (with casters, of course, making it a mobile-ready rack). The casters are removable for easy stacking of the enclosure cabinets. Castors and hardware come inside the rack and then are simply bolted on out of the box. Included: Assembled EG4 6 Slot Battery Rack + Castors Features: Constructed from heavy-duty steel Durable black powder-coated finish Heavy-duty bus bars with protective covers
Dimensions:
Rack: 46.3" x 23.6" x 26.8"
With Casters: 49.4" x 23.6" x 26.8"
Weight: 168.9 lbs
sku 1511095
EG4 Indoor Battery Parallel Kit: https://signaturesolar.com/eg4-powerpro-battery-paralleling-cables/?ref=bkpkbxde
2/0 cable lugs: https://signaturesolar.com/eg4-wallmount-indoor-battery-48v-280ah-14-3kwh-indoor-heated-ul1973-ul9540a-10-year-warranty-pre-order/?ref=bkpkbxde
EG4 6000XP Battery Kit: https://signaturesolar.com/eg4-wallmount-indoor-battery-280ah-51-2v-14-3kwh-eg4-6000xp-off-grid-inverter-bundle-8000w-pv-input-6000w-output-all-in-one-solar-inverter-bndl-e0009/?ref=bkpkbxde
EG4 6000XP only: https://signaturesolar.com/eg4-6000xp-off-grid-inverter-split-phase/?ref=bkpkbxde
EG4 Indoor Wallmount Battery: https://signaturesolar.com/eg4-wallmount-indoor-battery-48v-280ah-14-3kwh-indoor-heated-ul1973-ul9540a-10-year-warranty-pre-order/?ref=bkpkbxde
EG4 Indoor Wallmount Battery Conduit box: https://signaturesolar.com/eg4-48v-indoor-280ah-wallmount-battery-conduit-box/?ref=bkpkbxde
EG4 Indoor Battery Parallel Kit: https://signaturesolar.com/eg4-powerpro-battery-paralleling-cables/?ref=bkpkbxde
------------------------------------------------------------------
In this episode, we take a look at the parallel kit from EG4. This kit is designed to parallel powerpro and indoor wallmount batteries using their bus bars. The kit is the same item for both the power pro battery and indoor wall mount battery. The kit includes three cables positive cable, negative cable, and communications cable. The power delivery cables are 2/0 and the communications cable is a cat6 cable. They are roughly 53 inches in length and the communications cable is closer to 59 inches in length. You would use these cables to parallel connect the power or indoor batteries using the quick connect Degson connectors and the built-in bus bars. The cables come terminated with the quick connectors and the RJ45 connectors for quick install installation. Timecode 0:00 - EG4 Parallel kit unboxing 3:12 - EG4 Parallel Kit Length 4:00 - EG4 Cable Close look 6:57 - Parallel Kit Installation 14:37 - Parallel batteries in the app 15:28 - EG4 Parallel Kit thoughts
-------------------------------------------------------------------
1511073 EG4 PowerPro Battery Paralleling Cables / Indoor Wallmounst Battery Paralleling Cables
• Red positive battery parallel cable 53.1 in. (Qty 1)
• Black negative battery parallel cable 53.1 in. (Qty 1)
• Parallel Communication cable 59.1 in. (Qty 1)
EG4 6000XP Battery Kit: https://signaturesolar.com/eg4-wallmount-indoor-battery-280ah-51-2v-14-3kwh-eg4-6000xp-off-grid-inverter-bundle-8000w-pv-input-6000w-output-all-in-one-solar-inverter-bndl-e0009/?ref=bkpkbxde
EG4 6000XP only: https://signaturesolar.com/eg4-6000xp-off-grid-inverter-split-phase/?ref=bkpkbxde
EG4 Indoor Wallmount Battery: https://signaturesolar.com/eg4-wallmount-indoor-battery-48v-280ah-14-3kwh-indoor-heated-ul1973-ul9540a-10-year-warranty-pre-order/?ref=bkpkbxde
EG4 Indoor Wallmount Battery Conduit box: https://signaturesolar.com/eg4-48v-indoor-280ah-wallmount-battery-conduit-box/?ref=bkpkbxde
EG4 Indoor Battery Parallel Kit: https://signaturesolar.com/eg4-powerpro-battery-paralleling-cables/?ref=bkpkbxde
-------------------------------------------------------------------
In this episode, we take a look at how to wire up and connect the EG4 6000XP and the EG4 indoor wallmount battery and it's corresponding conduit box. This comes as a kit even though you can purchase each of the components separately. You will get everything you need to get going and connect up the kit, but you will need to provide your own battery cable lugs and a way to crimp them. This is probably the best value and versatile off grid inverter system you can get because it can also do 240 V on a single unit. Everything is well integrated with and it looks compact and works nicely together.
1632010 - lugs | 1511094 - conduit box | BNDL-E0009-1 - inverter, battery, conduit box kit | 1511092 - Indoor Battery
EG4 48V Indoor 280Ah WallMount Battery Conduit Box Unboxing / Review | 1511094
Conduit Box: https://signaturesolar.com/eg4-48v-indoor-280ah-wallmount-battery-conduit-box/?ref=bkpkbxde
6000xp Inverter: https://signaturesolar.com/eg4-6000xp-off-grid-inverter-split-phase/?ref=bkpkbxde
Indoor battery: https://signaturesolar.com/eg4-wallmount-indoor-battery-280ah-51-2v-14-3kwh-indoor-heated-ul1973-ul9540a/?ref=bkpkbxde
Kit for battery, box, and inverter: https://signaturesolar.com/eg4-wallmount-indoor-battery-280ah-51-2v-14-3kwh-eg4-6000xp-off-grid-inverter-bundle-8000w-pv-input-6000w-output-all-in-one-solar-inverter-bndl-e0009/?ref=bkpkbxde
In this episode, we take a look at the conduit box for the EG4 indoor wallmount battery. This box is designed to work with the battery and also pair perfectly with the E4 6000 XP off grid inverter. What they four integration between the battery and the inverter this box is perfect for connecting the kit or can be used separately. It comes with all the glands and protectors that you need and is priced reasonably. The EG4 280Ah WallMount Indoor Conduit Box allows users a simple way to protect cables and connections between battery and inverter from the elements. The conduit box is designed to seamlessly integrate with the 280Ah WallMount Indoor Battery, as well as multiple inverters, including the 18kPV and 6000XP
1511094
EG4 6000XP Inverter 6 month Review | 8000W PV | 6000W | 480V VOC | 48V 120/240V Split Phase
6000xp inverter: https://signaturesolar.com/eg4-6000xp-off-grid-inverter-split-phase/?ref=bkpkbxde
-------------------------------------------------------------------
Features The EG4 6000XP is a cutting-edge 48V split-phase, off-grid inverter and charger, designed to revolutionize your energy needs. With an impressive 8kW of PV input capacity and an efficient 6kW continuous power output, it also serves as a battery 140A charger. What sets it apart is its scalability - you can parallel up to 16 units for an impressive 96kWs of output power while controlling multiple stations and units seamlessly using our advanced EG4 monitoring software.
Performance Components
6000W rated output power Parallel up to 16 units for 96kWs of output power Built-in Switchgear for reduced installation costs and enhanced safety Save up to $300 with built-in breakers, disconnects and more! Transformer-Free Design Dedicated Generator Connection Inverter, AC Charger, and Solar Charge Controller All-In-One Everything needed to get started Simple to install, easy to manage Manages power from energy storage systems, and grid simultaneously 120/240V split phase Efficiency MPPT Efficiency 99% Outperforms similar-sized competitors by an average of 7%
Battery Charging
Efficiency 93% Battery Discharging Efficiency 93% 50W Idle Consumption (with battery) Monitoring EG4 Monitoring App Google Play App Store Wi-Fi/4G/LAN RS485
Comprehensive Certifications
UL 1741
Ingress Protection Rating: IP20
How to Setup battery communications EG4 6000xp and aolithium lifepo4 server rack batteries
6000xp Inverter: https://signaturesolar.com/eg4-6000xp-off-grid-inverter-split-phase/?ref=bkpkbxde
Lifepower4 battery: https://signaturesolar.com/eg4-lifepower4-lithium-battery-48v-100ah/?ref=bkpkbxde
In this episode, we take a look at how to set up battery communications between the EG4 6000XP off grid inverter and AOlithium server rack 48V lithium, iron phosphate batteries LifePO4. We connect the batteries into a parallel set of three and then link the batteries to the E4 6000 XP inverter using the battery communications cable. We also check out what it looks like inside of the app.
Aolithium 51.2v 100ah Server Rack Lithium LiFePO4 Battery for Off Grid/Home Backup
Rackmount Design: Supports parallel expansion, high energy density battery products with the same energy supply in a smaller size.
LCD Screen: Real-time monitoring of battery voltage, current, temperature and SOC during charging and discharging.
Programmable Smart BMS: Individual cell status can be monitored.
6 Temperature Sensors: Detects cells, environment, power MOS temperature, alerts and protects when charging and discharging at high or low temperature.
Communications: RS485A/CAN communication interface
Lifespan: More than 4000 cycles @ 85% DOD, more than 6000 cycles @ 80% DOD.
Adaptation: Compatible with Pylontech, GoodWe, Deye, Megarevo , Victron inverters.
------------------------------------------------------------------
SignatureSolar SKU
1511006
1511090
EG4-WallMount Indoor Battery Review | 48V 280Ah | 14.3kWh | Indoor | Heated UL1973, UL9540A
In this episode, we take a look at the EG4 wall mount indoor power pro battery. This is the smaller brother or the indoor brother of the original power pro battery and it's pretty much the same battery except it is indoor rated only.
Indoor Battery: https://signaturesolar.com/eg4-wallmount-indoor-battery-280ah-51-2v-14-3kwh-indoor-heated-ul1973-ul9540a/?ref=bkpkbxde
EG4 Chargeverter (new model): https://signaturesolar.com/eg4-chargeverter-gc-48v-100a-battery-charger-5120w-output-240-120v-input-pre-order/
6000XP: https://signaturesolar.com/eg4-6000xp-off-grid-inverter-split-phase/?ref=bkpkbxde
The WallMount Indoor 14.3kWh batteries are ideal for low-voltage residential indoor energy storage applications. The batteries use lithium iron phosphate cells with the highest safety performance and an intelligent Battery Management System (BMS) that can monitor and record the voltage of each cell along with the current, voltage, and temperature of the module in real-time. The BMS also contains a passive balance function and an advanced battery control method, both of which improve the performance of the battery pack. ON-BOARD LCD TOUCH SCREEN Easy to see BMS monitoring, and selectable closed-loop communications with EG4, Schneider, Sol-Ark, Victron, Growatt, Megarevo, Luxpower, and Deye inverters. DUAL ON-BOARD FIRE ARRESTORS Offer fail-safe protection against thermal runaway. INTEGRATED SELF-HEATING FEATURE Internal heating keeps cells operating during cold temperatures. INTEGRATED BUSBARS The battery design comes manufactured with 600A internal busbars with multiple terminals (4 positive & 4 negative) eliminating the need for external busbars when paralleling batteries and/or multiple inverters. INNOVATIVE EMERGENCY STOP FUNCTION The optional ESS disconnect can shut down all batteries and inverters (if equipped with rapid shut down capability) with the press of a button. THE PERFECT PARTNER TO EG4 INVERTERS The optional conduit box mates up directly to the connection ports of EG4 inverters allowing a sleek and efficient installation. For other inverters or stand-alone battery installation, the conduit box plugs should be installed. Module Operating Parameters Voltage: 51.2V Total Energy Capacity: 14.3kWh Capacity: 280Ah Charging Voltage (Bulk/Absorb): 56.0V (+/-0.8V) to 56.2V (+/-0.2V) Float Voltage: 54V (+/-0.2V) Low DC Cutoff: 44.8V (adjustable start from 47V to 45.6V) Charging Current: Up to 200A (continuous), recommended range: 60A - 160A Discharging Current: Up to 200A (continuous), recommended: 160A Environmental Parameters Charging Range: 32°F to ≈113°F (0°C to ≈45°C) Discharging Range: -4°F to ≈122°F (-20°C to ≈50°C) Storage Range: -4°F to ≈122°F (-20°C to ≈50°C) Ingress Protection: IP20 Charging/Discharging Protection Overcharging Protection: 205A (10 sec), 225A (3 sec) Temperature Protection: 23°F or 158°F (1 sec), -5°C or 70°C (1 sec) General Specifications Communication Ports: RS485/CAN Can be customized Cycle Life: 8000 Cycles, 80% Depth of Discharge (DOD) Design Life: Over 15 Years Weight: 282.2 lbs. (128 kg) Safety Certifications: UL1973, UL 9540A (Testing) Kit: BNDL-E0009-1 Battery: 1511092 Conduit box: 1511094.
Final Cut Performance on M1 vs M2 vs Intel | macbook pro apple silicon worth it | FCPX | chronox
In this episode, we take a look at the performance in Final Cut Pro between the MacBook Pro M1 and the M2 generation of processors. We also compare the baseline of an Intel I7 based MacBook Pro. So are the upgrades really worth the money? That's what we here to find out. Does the M1 apple silicon Mac perform better than Intel processor Mac also how much is the M2 Mac over the M1 Mac. How much does the apple silicon have advantage over Intel based machines on Final Cut Pro?
Should you upgrade to an apple silicon mac?
In short, Apple silicon is worth the upgrade over Intel based computers when using Final Cut Pro.
Setup battery communications EG4 3kw Inverter and aolithium lifepo4 server rack batteries 3000EHV-48
Inverter: https://signaturesolar.com/eg4-3kw-off-grid-inverter-3000ehv-48/?ref=bkpkbxde
In this episode, we go over how to set up battery communications with the EG4 3KW off grid inverter and the lifepo4 48V 100ah server rack batteries from AO lithium. The inverter comes with the cable you need to use, you need to use the USB to RJ-45 cable and use the CAN/485A port on the lithium battery. Which is the far left port on the battery. If you want to add additional communications with other batteries in the set you can use ethernet cable and pretty much Daisy chain the batteries using the two right RJ45 ports CAN485B.